Self-Inflating Sleeping Pad – M

◆ How to Inflate ◆

1. Lay the pad flat and open the top cap and one-way valve. The enlarged valve allows the foam to quickly draw in air and speeds up inflation.
2. Once most air has been absorbed, close the one-way valve (with the “IN” mark facing up). You can now connect a pump or blow a few breaths to firm up the pad. To adjust softness, gently press the inner flap of the valve to release a small amount of air.
3. Close the top cap to complete setup.

Note: For first-time use or after long storage, the pad may take longer to fully inflate. To restore its performance, inflate and deflate 2–3 times or blow in a few breaths.
Alternative Method: Let the pad self-inflate for 3–5 minutes, close both the cap and valve, then roll from the valve end to the foot end to force air inside. Repeat 2–3 times to improve performance.

◆ How to Store ◆

1. Open the top cap and one-way valve. Fold the pad into thirds and press down with your body weight to quickly release most of the air.
2. Close the one-way valve (with the “OUT” mark facing up). This enables one-way air release and prevents air from re-entering. Lay the pad flat and roll it tightly from the foot end toward the valve to push out the remaining air. This helps minimize packed size.
3. Close the top cap to complete storage.

◆ Care Instructions ◆

1. When not in use, store the pad in an inflated state under a bed or behind a sofa. This helps maintain the PU foam’s resilience.
   Important: Always store the pad dry. Our products use eco-friendly TPU, which can deteriorate in humid environments and shorten the pad’s lifespan. Keeping it dry also prevents mold or odors.
2. Avoid contact with sharp objects (e.g., rocks, branches, pet claws).
3. Do not expose the pad to high heat, open flames, or use it as a floatation device.
4. Do not overinflate or fold the fully inflated pad in half. This may damage the internal foam.
5. For cleaning, use mild detergent. Be sure to dry completely before storing.
6. Suitable for indoor and outdoor use.
7. When using the pad inside a tent during hot sunny days, open the valve to prevent damage from expanding air due to heat.

◆ Cleaning Instructions ◆

When cleaning the pillow or pad, ensure the valve is closed. Use a mild, neutral detergent and gently wash the surface. After washing, air-dry thoroughly for 1–2 days before storing. Avoid direct sunlight, as it may damage the TPU and shorten the product’s lifespan.

【Product detail】